STR-FRAV4 for Tascam FR-AV 4

‍The Strut STR-FRAV4 is a custom designed Field case for the Tascam FR-AV4 field recorder. The advantage of choosing a custom case is to take better advantage of the FR-AV4 features in the field and in run-and-gun situations. For rigging setups utilizing the ¼-20 mounts you will want to take the device out of the case as with any field case.

A key focus for the STR-FRAV4 is to allow for situations when the 4 native AA batteries are not enough. A battery pocket located on the body side of the FR-AV4 lies flat when empty, but will hold a 20,000 mAh USB battery bank for easy hot-swapping. There are wiring ports from the pocket to the left wiring boot, and the boot itself is deep enough to use the necessary straight-in USB-C cable with single M2 thumbscrew Tascam makes available for best plug in security. There is room in the pocket for a service coil. As of this writing, there are no right angle cable solutions for this important feature, but we found several options for straight-in cables with thumbscrews.

Our 3-way cable boots seal against weather and dust and are compatible with standard straight connections. To bypass the velcro seal, a full length zipper opens for quick plug-in, headphone or volume adjustment.

On the front of the STR-FRAV4 the RX pocket is padded with a wiring port. The lid folds back flat. Inside are 2 elastic slots for receivers. Outside, the front of the pocket has webbing for additional clip-on devices. The slots can fit rx up to Lectro DCR-822.

To the right of the pocket is a headphone caddy that can alternately be used for cable management. Above is a clipping point for a carabiner.

The STR-FRAV4 comes with a bottom battery door , clear marine vinyl rain top, coated domestic 1000D nylon Cordura construction, and free HAR-2 harness. There are two “D” rings on the back to clip on an audio belt ( not included).
MADE IN USA


Key Features and photos:

Front right angle raintop rolled w cable caddy

  • Fold-back RX Pocket lid

  • Padded RX pocket

  • Inside elastic RX slots

  • wiring port

  • Headphone caddy

  • External clip on web on front of pocket

Front Top open

  • 3-way cable boots, left and right

  • fold away weather/dust shield

  • AA battery door on bottom

  • Double harness connections

Front w raintop

  • Rain top deployed

  • HAR-2 chest harness included

Rear battery pocket with rolled raintop

  • 2 ‘D’ rings for audio belt (not incl.)

  • USB-C battery bank pocket for 20,000 mAh USB battery bank

  • Adjustable pocket lid

  • see Pro tips *

Back left w cable port from battery pocket to main compartment

  • Body side battery bank pocket

  • Left side dedicated wiring ports in battery pocket and main compartment

  • 2 bottom ‘D’ rings for Audio belt (not incl.)

  • see Pro Tips*

Cable caddy

  • Handy quick storage for excess cable loops

  • Headphone caddy

  • Web above the caddy for carribiner clip-in

Right end, weather shield boot closed with boot zipper open

  • Easy Headphone plug-in and volume control

  • 2 ‘D’ rings for audio belt (not included)

Right end boot open

  • Full cable boot with velcro seal against environment

  • Roll back option for unobstructed access

  • Full zipper on body side for bypassing boot or interim adjustment and headphone volume access

*PRO TIPS…

  1. Consider 12” to 18” soft silicone or braided jacket cable with straight-in USB-C cable and single M2 thumbscrew. Consider a cable long enough for a service coil loop in pocket for easy hot swap and to relieve potencial tension on cable connection.