MixPre-10 II

Weighing only 16 ounces, the STR-MP10 Ultralight Soft Field Case from STRUT is custom-designed to efficiently operate the Sound Devices MixPre-10 II in the field for either FX or RX situations. Featuring a unique integrated carbon-fiber support skeleton, adjustable suspension cradle, and padded compartments, it provides full access to the unit's controls and connections while protecting it from challenging environment and impact. This system suspends the mixer above the case floor, protecting vulnerable wiring (specifically the 4-pin Hirose) and accommodates multiple powering options. This is a case that allows you to do more jobs with less. Less bulk, less weight, less time.

The front pocket can hold up to four Sennheiser G4 or four Lectrosonic dual-channel receivers, plus BDS , a wiring port to the main compartment, and a full zipper on the bottom of the RX pocket makes cabling fast, and orderly. The case is equipped with a removable clear vinyl cover for dust and rain protection, which converts to a solid Cordura travel cover to protect your valuable equipment in transit and hide equipment from prying eyes. There is no logo on the travel cover for added security.

There is a zippered “smalls” pocket in the front with web clip-on points for Comtek or additional RX. Zippered access points on the left and right sides let you plug in headphones, adjust volume, encoder knob, and make discreet cabling changes during production. Battery changes are made easy with the bottom zipper opening which provides access to the recorder's battery compartment and Media. The bottom battery wrap will conveniently accommodate an external battery pack. The case features double belt loops and 4-point harness attachment. The HAR-2 lightweight chest harness is included with purchase of the case. Made in USA

Key Features and Photos:

Front View FX mode

  • Lightweight, small-footprint protective case, with easy access to all MixPre-10 II features

  • Adjustable inside sling with soft pillowing in main compartment to suspend mixer and protect vulnerable wiring beneath

  • zippered “smalls” pocket for antennae, small tools, media, personal items, connectors. Smalls pocket has two horizontal web clip-on points.

  • cable caddy seen here to the left

  • Stealthy, Low-Profile carbon fiber inner skeleton combines carbon fiber rods with high density foam to achieve desired support and protection without weight.

  • Tabs thread through “golf tees” on mixer, through the slot on “D” rings then velcro to loop cross-link. Tab so not to obstruct side panels. No need to cinch tight.

MP10 side boot zip, connections

Right Side View

  • Left and Right boot zippers for checking connections, plugging in headphones, adjusting volume , encoder, etc., quiet mid-production changes.

  • Cable caddy shown here to park headphones

MP10 travel cover

Travel Cover

  • Rain Top converts to solid travel cover

  • No logo for added security

  • Protective cover also conceals contents from prying eyes. Looks like a shoulder bag.

MP10 front RX mode

Front View RX Mode

  • Padded RX compartment, lid tucks out of the way.

  • Elastic slots for four SRC-duals with room for BDS, six slots in all.

  • Comtek clips on front of Smalls pocket or on pocket rim.

  • Cabling port between receiver pocket and main recorder compartment

  • 7” zipper on bottom of pocket makes it easy to wire.

MP10 smalls front pocket

Smalls Pocket, Close up

  • Small padded, zippered pocket for stowing smalls like antennae, media, tools and accessories 7”x3”x1”

  • Two horizontal web attachment points

  • Made in the USA

MP10 raing top

Rain Top

  • Removable clear vinyl cover for dust and rain protection.

  • Plenty of room for hands to work

  • High grade marine vinyl where you need it, the remaining half is solid to help block ambient light.

  • Converts to a solid travel cover with no logo.

MP10 cable caddy

Front View

  • Cable caddy on right side to hang coiled cable or headphones—adjustable with quick-release.

MP10 side cable boot zip

Rear Left View

  • Left and right cable boots with zipper and hook-and-loop fastener protect connections and provide easy access to XLR cables or headphone adjustments while sealing out dust and moisture

  • Full zippers on Left and Right Boots let you in without disturbing velcro seal. Make a connection during shoot, change volume, adjust encoder, discreetly.

MP10 side view

Right Side view

  • Adjustable sling with soft pillowing in main compartment suspends mixer and protects vulnerable wiring beneath.

  • Adds volume for NP-F batteries.

  • velcro cable seals or roll back if not needed for environmental conditions.

MP10 bottom battery wrap

Bottom View

  • Bottom battery wrap accommodates NP-F batteries, USB-C Power Bank, or NP1-style battery

  • Velcro “hook” gives added stability to NP-1 or USB-c Power Banks. Apply adhesive backed Velcro “loop” to battery in a location that will marry to “hook” on flap.

MP10 RX pocket wiring access

Bottom RX Pocket

  • 7” Zipper at bottom of RX pocket for access to wiring.